In the video, we conducted angle iron bending tests according to customer requirements.
Angle iron is one of the more relaxed capabilities in the bending capacity of the profile bending machine, and it is also more widely used. At this time, we can also call it an angle bending machine.
As you can see from the video, this is a small factory. The workers are already too old.
From the control button, you can know whether the controller of the profile bending machine is the old model in the BIT series machine (the new model uses the joystick design).
Profile bending machine can bend a large variety of materials including but not limited to, Aluminum, Brass, Copper, Inconel, Chrome Moly, Copper Nickel, Carbon Steel, Titanium, and Stainless Steel tubes.
BIT pipe & tube bending machine (section bender) is capable of bending a range of outer diameters in sizes from Φ76×4 up to Φ510×20 and everything in between to serve production volumes of any size.
Section modulus is a measure of the shape of the crosstie and is calculated by dividing the MOI by the greatest distance of the section from the neutral axis, calculated from dimensions and rectangular cross-section.
Section modulus is a term that not many people are familiar with, but this term is something that bending and rolling companies deal with on a daily basis. Section modulus is a geometric property for a given cross-section used in the design of steel beams or flexural members. The relationship between many geometric properties such as tension, compression and shape of the member lead to the calculation of its section modulus.
Profile bending machine can bend most all aluminum structural shapes. Structural shapes can be rolled in to rings for many uses, the corrosion resistance as well as its strength-to-weight ratio make aluminum rings very useful.
Many sports and entertainment arenas use curved aluminum for its light weight and strength when making curved supports for overhead signage, display boards, and monitors.
Description The same tolerances with titanium pipe as we do with stainless steel. A well-established solution for industries dealing with severe environments, titanium is immune to damage caused by seawater and water. This versatile material is commonly used by the following sectors: Application Titanium Pipe Bends uses in Oil and Gas PipelineASTM B363 Titanium Pipe […]
It’s worth a mention firstly that there are two common terms used in industry, tube bending and pipe bending. Tube is measured by the outside diameter whereas pipe is measured by the inside diameter. Pipe sizing refers to the nominal inside diameter, sometimes called nominal bore, rather than the actual inside diameter.
Benefits Of Copper/Brass For Bending & Rolling: Copper is a time-honored metal that is relatively easy to work with. Available in hard and annealed tempers,. There are various types of copper tubes and pipes, including common copper alloys such as bronze and brass. Features and advantages of copper include: Thermal conductivity Malleability & ductility Corrosion […]
Bent beams are used everywhere – in structures for functionality or aesthetic appeal, in circular shell stiffening rings on vessels and for monorails or roof trusses. Steel beams can be rolled vertically (the weak-axis) or horizontally (the strong axis). When rolling steel beams, it is important to consider distortion.
