Skip to content

MSH-300 Angle Roller

Two bottom rollers fixed, top roller lifting by hydraulic oil tank. Three drive rolls, the power come from hydraulic motor. The side guide rollers ensure the high quality bending of asymmetric profiles.

MSH-300 Angle Roller (section rollers, angle roller, angle rolls) belongs to half hydraulic profile bending machine.It is commonly applied in the fields of petrol,chemical, shipyard, metal working and machine manufacturing industries.

Bending and checking circle will be completed as long as the machine starts feeding. Actually,two bottom rollers are fixed and hydraulic oil tank always supports top roller to move.Hydraulic motor acts as the power of three drive rolls.

MSH-300 Angle Roller
MSH-300 Angle Roller

High-quality bending of asymmetric profiles can be guaranteed with the side guide rollers .This machine not only has small volume and full function,but also has advanced and reliable structure.It can be classified into advanced profile bending equipment in the world so far.

  • High-rigidity steel welded construction frame
  • Superior hardened shafts from special steel material
  • Top roll hydraulically does movement
  • Customer can select horizontal or vertical working position
  • Simply operate mobile control panel
Max. Bending resistant modulus30CM3
Yield limit245Mpa
Down roller speed180mm/min
Mold diameter350mm
Bending speed4.5m/min
Hydraulic pressure19.5Mpa
Motor power7.5KW
PROFILEMax.Section (mm)Min.bending DIA(mm)
bar profiles bent hard way80×20Φ850
bar profiles bent easy way180×25Φ1650
bent square bar profiles55×55Φ550
bent pipe profilesΦ80×5Φ750
bent square tube profile70x70x4Φ1000
angle profile bending toes-in90x90x10Φ1000
angle profile bending toes-out90x90x10Φ2500
channel profiles bending toes-in160Φ800