SECTION BENDING FLAT BAR
Bent flat Bar is frequently used in tank stiffeners, matching flanges, curved lintels, hand rails, curved stringers, pipe clamps and kick rails on circular platforms.
Steel Flat Bars
Metal flat bars or ‘Flat Sections’
Steel flat bars are one of the most basic of building materials.
Flat metal bars are practical anywhere a connection between two beams is required.
Appliction of bent flat bar
Bent flat bars are frequently used in tank stiffeners, matching flanges, curved lintels, hand rails, curved stringers, pipe clamps and kick rails on circular platforms.
Bars can be bent with virtually every bending process.
For very tight radius bending you can utilize a draw bending process where you must be pull the material (draw the material) around a bend die matching the desired bend radius.
But for larger or sweeping radii must be utilize a roll bending process (section bending).
At this time, need to use flat bar bending machine.
Appliction of flat bars
- Base plates
- End plates
- Stiffeners (secondary plates)
- Splice plates
When a flat section is cut into smaller pieces it is called a flat steel plate. Flat sections are often used to strengthen other beams and are sometimes used to reinforce timber joists. That is why it is so typical to see a flat steel bar with holes in it, ready to be bolted in place.
What is flat bar bending?
Flat bar can be bent both the easy way (against the weak axis) and the hard way (against the strong axis).
Flange bending machine have the ability to bend flat bar the hard way for any thickness .And have the ability to bend flat bar the easy way for any thickness.
Selection table of BIT profile bending machine for bending flat bar
Bar materials can come in various shapes and sizes. BIT Series Flat bar bending machine ( Profile Bending Machine ) can be ability to bend round bar, square bar and flat bar. All of these shapes are solid.
|Model||Hard Way X-X Axis||Easy Way Y-Y Axis|
|Specification (mm)||Minimum Inside Diameter (mm)||Specification (mm)||Minimum Inside Diameter (mm)|
|W24S-16||80× 10||800||180× 20||500|
|W24S-45||100× 25||700||200× 35||600|
|W24S-75||120× 25||1000||250× 30||1000|
|W24S-140||150× 30||1500||250× 40||1000|
|W24S-180||175× 40||1500||350× 50||900|
|W24S-250||200× 50||2500||400× 60||2000|
|W24S-320||250× 70||3500||450× 70||1000|
|W24S-400||250× 70||3500||500× 80||1200|
|W24S-500||300× 70||4000||500× 100||1600|
|W24S-600||300× 80||5000||650× 100||2000|
Flat bar bending machine/flat bar bender photos
BENDING MACHINE FLAT METAL BENDING
Section and profiles bending
Section bending methods of metal profiles.
Select the items you want to follow based on the subtitles below.
Next, you will find relevant information, including the processing capabilities of different profile bending machines manufactured by BIT related to the project you care about.