Skip to content

PBH-550 PROFILE BENDING MACHINE

The section modulus of PBH-550 profile bending machine is 400CM3. It is a more powerful section bending machine that provides outstanding capabilities at a competitive price and can bending all types of profiles.

W24S-400 large hydraulic profile bending machine

PBH-550 Section bending machine

The section modulus of PBH-550 profile bending machine is 400CM3. It is a more powerful section bending machine that provides outstanding capabilities at a competitive price and can bending all types of profiles.

More powerful PBH-550 profile bending machine, provides excellent functions at a competitive price, and can bend all types of profiles.

The three rollers are driven by three independent hydraulic motors and three planetary gears directly connected to each roller to achieve higher torque transmission.

The PBH-550 profile bending machine can provide the best results for the bending of special and standard profiles and tubes of mild steel, stainless steel, aluminum, bronze, copper and other steel alloys. The PBH-550 profile bending machine can provide the best results for the bending of special and standard profiles and tubes of mild steel, stainless steel, aluminum, bronze, copper and other steel alloys.

In the process of processing, the special three-dimensional lateral hydraulic guide roller is more powerful, can support and accompany the curved profile, with up and down, left and right movement and push/pull movement, so that the operator can control the work 360 degrees.

Efficient and reliable cooling system

The hydraulic system of the BIT series section bending machine is equipped with an efficient heat dissipation system. Even in the hot Middle East, the BIT machine will not reduce performance or even stop working due to the overheating of the hydraulic system.

PBH-550 Profile Bending Machine Specifications

Max.Section(mm): 250×70 Max.Section(mm): 500×80
Min.bending DIA(mm): Φ3500 Min.bending DIA(mm): Φ1200
Max.Section(mm): 165×165 Max.Section(mm): Φ400×6
Min.bending DIA(mm): Φ3000 Min.bending DIA(mm): Φ8000
Max.Section(mm): 250x250x12 Max.Section(mm): 200x200x28
Min.bending DIA(mm): Φ10000 Min.bending DIA(mm): Φ4000
Max.Section(mm): 200x200x28 Max.Section(mm): 550
Min.bending DIA(mm): Φ6000 Min.bending DIA(mm): Φ4000
Max.Section(mm): 550 Max.Section(mm): 250x250x30
Min.bending DIA(mm): Φ4000 Min.bending DIA(mm): Φ4000
Max.Section(mm): 550 Max.Section(mm): 400
Min.bending DIA(mm): Φ4000 Min.bending DIA(mm) Φ35000
Sectional modulus cm3: 320-400 Bending speed: 4.5 Meters/Minute
Material yield limit(Mpa): 250 Motor power (KW): 37

PBH-550 Profile Bending Machine Photos

Story of PBH-550 profile bending machine

In the article PBH-450, we mentioned that a factory in Jiangsu successively purchased two BIT profile bending machines.

PBH-550 is the second machine purchased by this factory, and the day the contract was signed was the third day of the Chinese New Year.

Group photo with factory manager and PBH-550 Profile Bending Machine

After two months, we completed the assembly and debugging of the machine, and there is no paint yet. Due to the customer’s bending needs, they directly took away the unpainted machine and went back to paint by themselves. At the same time, due to plant problems, the factory did not use the foundation, but welded the workbench for bending.

In the introduction of the PBH-600 machine, we will also see an unpainted machine performing I-beam section bending, which is also due to the same reason.

Video of PBH-550 profile bending machine

In the video, our customers are very excited to say: It can bend large flanges of more than 1 ton.

List of our products:profile bending machine
Must know section bending information:practical guide to the section bending of various metal profiles

Under the link, we provide detailed information on three series of profile bending machines. You can click on the specific model to read more detailed machine information and some related stories about the machine.

PBH SERIES

All PBH series section bending machines are driven by a hydraulic motor (up to 9), with powerful bending ability.
Standard machine section modulus: 16CM3-600CM3. It can bend copper, carbon steel, stainless steel, and aluminum profiles.
Angle, channel, beam, flat bar, round & square bar, pipe, square tube.

CNC Aluminum Profile Bending Machine

Servo motor drive. Photoelectric positioning, CNC control. Accuracy is as high as ≤0.01mm.
Suitable for difficult variable-curvature arc aluminum bending processing.Suitable for bending aluminum profiles for automobiles, doors, and windows suitable for bending aluminum profiles for automobiles, doors, and windows

PBT SERIES

High-performance cold pipe bending machine, CNC control, multiple programs, multiple angle settings, simpler operation, and program settings.
It is widely used and can be used in mass-produced or standardized products, such as exhaust pipes, seats, bumpers, and all steel furniture.

BENDING PROCESS

Section bending methods of metal profiles.

Recommendations for bending processes and bending machines for metal profile sections.

Exit mobile version