Skip to content


Section modulus: 140-180cm3. This is a profile bending machine for bending pipes customized for Malaysia. Products are mainly 168mm Pipe and Tapered round section. Bending radius approximately 1500m.

W24S-180 Section Bending Machine


Like other BIT profile bending machine, PBH-360 section bending machine is also a legendary model.

Medium and large section bending machine, which has a wide range of applications, is one of the most popular profile bending equipment in China and the world market.
Sectional bending can be performed on a variety of materials, including carbon steel, stainless steel, aluminum, titanium and copper.

H-beam bending machine
Crown profile bending-H-beam bending This is the PBH-360 profile bending machine produced by BIT for the construction of Chongqing subway in China for the section bending of H-beam

We have customized special equipment for it, so that the flat steel can be directly bent into a semi-circular curved profile. The profile is as follows:

Tube bending machine
We have customized the PBH-300 profile bending machine according to customer requirements, which can directly bend flat steel into semi-circular curved profiles.

In the BIT PBH-300 product introduction, we can also see another oddly shaped profile bending.


The machine in the photo above is a PBH-360 profile bending machine for pipe bending (we can also call it a pipe bending machine) customized for a Malaysian tower production company.

Profile bending roller bracket
Profile bending roller supports, each of our profile bending machines has three sets of strong roller sleeves. It makes us pay relatively more for the cost of a set of roller sleeves, but it will improve the accuracy and stability of the section bending process, which is a production cost worth paying.
BIT profile bending machine body internal support
Like all the profile bending machines we produce, there is a reinforced support hidden inside the fuselage, which provides reliable section bending stability during the bending process.
Profile bending machine hydraulic system
BIT profile bending machine equipped with 8 sets of hydraulic drive elements as standard (the ninth set can be customized for H-beam profiles bending). Compared with the popular 4 to 6 sets of hydraulic elements in the Chinese market, it makes bending more convenient and ensures the accuracy of section bending.
Combined die for BIT profile bending machine
The specially developed combination mould for profile bending allows customers to easily bend bars, angle, channel, H-beamsI-beam, square and rectangular metal tubes and tees without paying extra money. Note: The bending of circular pipes requires additional customized molds of corresponding dimensions.
auxiliary roller system
Up, down, left, right, front and back six directions can be controlled to move the auxiliary roller system

PBH-360 Profile Bending Machine Specifications

bar profiles bent hard way Max.Section(mm): 175×40 bar profiles bent easy way Max.Section(mm): 350×50
Min.bending DIA(mm): Φ1500 Min.bending DIA(mm): Φ900
bent square bar profiles Max.Section(mm): 110×110 bent pipe profiles Max.Section(mm): Φ219×6
Min.bending DIA(mm): Φ1600 Min.bending DIA(mm): Φ2500
bent square tube profile Max.Section(mm): 150x150x8 angle profile bending toes-in Max.Section(mm): 160x160x20
Min.bending DIA(mm): Φ5000 Min.bending DIA(mm): Φ1800
angle profile bending toes-out Max.Section(mm): 160x160x20 channel profiles bending toes-in Max.Section(mm): 360
Min.bending DIA(mm): Φ3000 Min.bending DIA(mm): Φ2000
channel profiles bending toes-out Max.Section(mm): 360 bent tee profile Max.Section(mm): 150x150x20
Min.bending DIA(mm): Φ2000 Min.bending DIA(mm): Φ2000
bent I-beam profiles Max.Section(mm): 360 bent H-beam profiles Max.Section(mm): 200
Min.bending DIA(mm): Φ2000 Min.bending DIA(mm) Φ9000
Sectional modulus cm3: 140-180 Bending speed: 6 Meters/Minute
Material yield limit(Mpa): 250 Motor power (KW): 15

PHOTOS of PBH-360 Profile Bending Machine

Video of PBH-360 profile bending machine for bending steel pipes

PBH-360 profile bending machine bends Φ168mm steel pipe in Malaysia.


Transportation mode of W24S-140 and W24S-180 profile bending machine
Transportation mode of PBH-300 and PBH-300 profile bending machine

It should be noted that the transportation of PBH-300, PBH-360 and PBH-450 profile bending machines requires a special 20-foot container with an open top because of the weight.

Hydraulic Profile Bending Machine

All PBH series section bending machine can bend copper, carbon steel, stainless steel and aluminum profiles.
Angle, channel, beam, flat bar, round & square bar,pipe,square tube.

CNC Aluminum Profile Bending Machine

CNC aluminum profile bending machine.

Suitable for bending of aluminum profiles for automobiles, doors and windows

cold pipe rolling machine

High-performance cold pipe bending machine, CNC control, multiple programs, multiple angle settings, simpler operation and program settings.
It is widely used and can be used in mass-produced or standardized products, such as exhaust pipes, seats, bumpers and all steel furniture.

section bending

Recommendations for bending processes and bending machines for metal profile sections.