PBH-200F 4-ROLL HYDRAULIC PROFILE BENDING MACHINE
The section bending capacity of PBH-200F 4-roll profile bending machine is the same as that of PBH-200 three-roll section bending machine; the difference is that it has four rolls,has the function of pre-bending the end of the profile, which can complete the pre-bending of the end of the profile and the roll forming of the workpiece without turning.Here, every secondary element is eliminated and results in higher torque transmission. Reduce the flat end of the profile, thereby saving a lot of cost.
Description
The section bending capacity of PBH-200F 4-roll profile bending machine is the same as that of PBH-200 three-roll section bending machine; the difference is that it has four rolls,has the function of pre-bending the end of the profile, which can complete the pre-bending of the end of the profile and the roll forming of the workpiece without turning.Here, every secondary element is eliminated and results in higher torque transmission. Reduce the flat end of the profile, thereby saving a lot of cost.
Small size, compact and reasonable structure, reliable performance, convenient operation and maintenance, and bending accuracy meets industry standards;
PBH-200F 4-Roll Profile Bending Machine Specifications
|
Max.Section(mm): | 120×25 |
|
Max.Section(mm): | 250×30 |
Min.bending DIA(mm): | Φ1000 | Min.bending DIA(mm): | Φ800 | ||
|
Max.Section(mm): | 70×70 |
|
Max.Section(mm): | Φ140×4 |
Min.bending DIA(mm): | Φ800 | Min.bending DIA(mm): | Φ1800 | ||
|
Max.Section(mm): | 100x100x6 |
|
Max.Section(mm): | 120x120x12 |
Min.bending DIA(mm): | Φ2000 | Min.bending DIA(mm): | Φ1500 | ||
|
Max.Section(mm): | 120x120x12 |
|
Max.Section(mm): | 200 |
Min.bending DIA(mm): | Φ2000 | Min.bending DIA(mm): | Φ1000 | ||
|
Max.Section(mm): | 200 |
|
Max.Section(mm): | 120x120x12 |
Min.bending DIA(mm): | Φ1000 | Min.bending DIA(mm): | Φ1500 | ||
|
Max.Section(mm): | 200 | Max.Section(mm): | 120 | |
Min.bending DIA(mm): | Φ1000 | Min.bending DIA(mm) | Φ4000 | ||
Sectional modulus cm3: | 45-75 | Bending speed: | 6 Meters/Minute | ||
Material yield limit(Mpa): | 250 | Motor power (KW): | 11 |
PBH-200F 4-roll section bending machine features
PBH-200F 4-roll section bending machine main drive type: All four work rolls are main drive rollers, which are realized by hydraulic motor and gears.
The position of the upper roller is fixed.
The three lower rollers move up and down as hydraulic drive.
BIT four-roll profile bending machine has up to 6 sets of hydraulic components, which can accurately drive the 3D guide rollers of the profile bending machine
By adjusting two more powerful horizontal hydraulic 3D guide rollers, they can be adjusted in the six directions of up and down, left and right movement and push/pull, respectively, and can support and accompany curved profiles to ensure optimal control of the rolling level Straightness, and correct the deformation of the profile rolling process.
SEARCH
TYPES OF
PROFILE BENDING MACHINE
PBH SERIES
All PBH series section bending machine can bend copper, carbon steel, stainless steel and aluminum profiles.
Angle, channel, beam, flat bar, round & square bar,pipe,square tube.
CNC SERIES
CNC aluminum profile bending machine.
Suitable for bending of aluminum profiles for automobiles, doors and windows
PBT SERIES CNC PIPE BENDER
High-performance cold pipe bending machine, CNC control, multiple programs, multiple angle settings, simpler operation and program settings.
It is widely used and can be used in mass-produced or standardized products, such as exhaust pipes, seats, bumpers and all steel furniture.
Bending Process
Recommendations for bending processes and bending machines for metal profile sections.