Angle Bending Machine hydraulic oil in the use of the process, because of mechanical, physical and chemical effects, is always to quickly or slowly aging deterioration. When the quality of the working medium is reduced to meet the requirements of the index, it must be replaced in time. Once the hydraulic oil is produced, it […]
Contents Ⅰ. Overview:Ⅱ. ApplicationⅢ. FeaturesⅣ. Working principle Ⅰ. Overview Angle bending machine is divided into two types: horizontal and vertical. It can be divided into up and down according to different shaft layouts. It is divided into three rollers and four rollers according to the number of rollers. It is a curved aluminum alloy profile, […]
Cold bending is done on machines commonly called profile bending machine (also called angle roller or section benders) .
These machines might have three or four rolls that induce the curvature of the steel sections as they pass through the tooling.
Unequal angle bending machine ( angle flange bending machine) and angle rolling machine are two names of the same machine Unequal angles are often used in tank stiffeners, matching flanges, curved lintels, hand rails, lagging rings, form work and fabricated roof trusses.
Angle bending machine (also called angle roller) is actually just a function of section bending of profile bending machine.
Angle bending machine can roll the Equal Angle or Unequal Angle, and the angle steel after processing still keeps the two sides of the angle steel perpendicular to 90° without flanging. And there are no wrinkles.
Many Chinese customers refer to the flat steel bending machine as a flange roll forming machine. For BIT, it is just an ordinary section bending machine for bending flat steel.
Sturdy body and strong section bending ability, BIT section bending machine can bend higher strength stainless steel bar like flat iron bar.
\In the picture, the BIT section bending machine uses the function of a tee bending machine, and it is bending a high-strength stainless steel tee.
A quicker and more effective way to straighten tees is with a BIT serise section bending machine (also called a “profile bending machine,” or an “section bender.”). The curved steel tee is run through large rollers with smaller calibrating rollers until it is straight.