Section Benders
Section Bending Machine
Section Bending Machine(Also called Profile Bending Machine, Section Benders, Angle roller, Angle Roll) includes manual and hydraulic. Guide rolls install on the two sides of the machine to ensure the bending quality.
About MS series Angle Roller
MS series profile bending machine (Angle Iron Roller)is a small manual or hydraulic profile bending machine.
Its volume and weight are very small, and of course its bending ability is also very small. Can not allowed to bend channel and H&I beam profiles.
MSM-50 SEcTION BENDER
The movable upper roller can move up and down by adjusting the height of the screw manually;
| PROFILE | Max.Section (mm) | Min.Section(mm) |
 | 80×15 | 30×6 |
 | 50×10 | 20×6 |
 | 30×30 | 10×10 |
 | Ø60×1.5 | Ø25×1.5 |
 | 40×3 50x30x3 | 30×2 40x20x2 |
 | 35x35x5 | 30x30x4 |
 | 40x40x5 | Φ2500 |
 | 50×6 | 20×3 |
MSH-50 Semi-hydraulic Angle Roller
The movable upper roller can move up and down by adjusting the height of the hydraulic cylinder;
| PROFILE | Max.Section (mm) | Min.Section(mm) |
| 80×15 | 30×6 |
| 50×10 | 20×6 |
| 30×30 | 10×10 |
| Ø60×1.5 | Ø25×1.5 |
| 40×3 50x30x3 | 30×2 40x20x2 |
| | 35x35x5 | 30x30x4 |
| 40x40x5 | Φ2500 |
| 50×6 | 20×3 |
MSH-200 hydraulic section bender
| PROFILE | Max.Section (mm) | Min.bending DIA(mm) |
| 50×12 | Φ500 |
| 100×18 | Φ600 |
| 50×50 | Φ500 |
| Φ42×4 | Φ500 |
| 45x45x3 | Φ750 |
| | 40x40x5 | Φ800 |
| 50x50x5 | Φ800 |
 | 80 | Φ600 |
| 50x50x4 | Φ500 |
MSH-260 Semi-hydraulic section bender
| PROFILE | Max.Section (mm) | Min. bending DIA(mm) |
| 75×16 | Φ800 |
| 150×25 | Φ1500 |
| 50×50 | Φ500 |
| Φ76×4.5 | Φ700 |
| 60x60x4 | Φ1000 |
| | 70x70x8 | Φ1000 |
| 80x80x8 | Φ2500 |
| 120 | Φ600 |
MSH-300 Semi-hydraulic Angle Roller
| PROFILE | Max.Section (mm) | Min.bending DIA(mm) |
| 80×20 | Φ850 |
| 180×25 | Φ1650 |
| 55×55 | Φ550 |
| Φ80×5 | Φ750 |
| 70x70x4 | Φ1000 |
| | 90x90x10 | Φ1000 |
| 90x90x10 | Φ2500 |
| 160 | Φ800 |