The bevel angle of the PEMH-H steel plate edge milling machines needs to be changed by replacing the forming cutter head with a corresponding angle, and it can process I, V, K-shaped bevels, etc. The PEMH-H is composed of left and right main machines. Each side of the main machine is equipped with 3 sets of independently driven milling units, which respectively complete the processing of the up bevel, down bevel, and blunt edge on one side. The left and right main machines can automatically adjust the processing plate width according to the requirements; the upper and lower bevel milling units can automatically feed horizontally to change the size of the blunt edge.
- Suitable for plate thickness ≤ 60mm, small bevel angle;
- Compact structure, few control points, and high-cost performance.
Parameters
| No | Processing thickness (mm) | Processing width (mm) | Processing length (mm) |
| 1 | 4-10 | 400-4000 | ≥ 4000 |
| 2 | 6-30 | 600-4000 | ≥ 4000 |
| 3 | 10-60 | 900-4000 | ≥ 4000 |
Photos
Experience Milling Precision with PEM Steel Plate Edge Milling Machine
Due to the gantry milling concept and the magnetic clamping units, the highest flexibility is given and even complex plate shapes such as trapezoidal and curved plates (e.g. for the vessel and wind tower industry) can be processed. For non-magnetic and complex materials such as Stainless Steel, High alloyed steels, Duplex and Super-Duplex grades, special clamping tables are available.
