Skip to content

Blog

tee bending machine

Tee bending machine

\In the picture, the BIT section bending machine uses the function of a tee bending machine, and it is bending a high-strength stainless steel tee.
A quicker and more effective way to straighten tees is with a BIT serise section bending machine (also called a “profile bending machine,” or an “section bender.”). The curved steel tee is run through large rollers with smaller calibrating rollers until it is straight.

tube-rolling-machine

square tube bending machine

BIT’s special square tube rolling machine (Tube roller bender) has a combined profile section bending die, which can easily bend square tubes of any material.

Pipe Bending Machine

Cold Pipe Bending Machine and Pipe Roll Machine

The BIT series profile bending machine (pipe bending machine) allow the best profile feeding and the highest driving torque of any competitive machine. A winning combination for those looking for performance of the highest level.

From the tightest bend to the broadest, BIT serise pipe bending machines’s bending processes produce little to no distortion or ovality.It work with almost all grades of carbon steel pipe and aluminum pipe. We can bend full and half pipe with equal quality and precision.

Flange Bending Machine

Flange Roll Forming Machine

In the past 30 years, due to the rapid development of China’s economy, about 20% of the machines we produce are used for flange forming, especially large flange forming that is difficult to mass produce.

For example, W24S-400, the factory manager once released a video to promote its large flange, the excitement can be felt across the screen.

Tube roller bender

Tube roller bender

BIT serise tube rolling machine (also called a “profile bending machine,”“Tube roller bender,” or an “tube bending machine.”) capabilities and equipment to provide square tube bending services on a complete range of materials, including aluminum, carbon steel, carbon stainless duplex steel, copper, titanium and exotic metals. No section is too small or too large for us to handle; we can manipulate square tubes of any size into custom-specified, flawless finished products with extremely tight tolerances.

Solid Rod Bending Machine

Round bar bending machine

BIT series profile bending machine can be used as round bar bending machine and solid bar bending machine.

High-strength tempered steel mold, high sensitivity and tolerance, without the notch effect caused by bending work.

C steel channel bending machine

Channel Bending Machine

BIT series profile bending machines can be used as C steel channel bending machines. It should be pointed out that PBH-120, PBH-140 do not support the horizontal section bending of channel steel profiles (Hard-way bending).

I beam bending machine

Beam bending machine

The section bending machine specially customized by BIT needs the ninth group of hydraulic drive components for beam bending machine. Due to the rapid development of China’s basic engineering, BIT series profile bending machines are more widely used in steel beam bending, such as the application of Chongqing Metro, a key project in China.

WQJ-400 Profile Bending Machine

MSM-50 SECTION BENDER

WQJ-400 is a small manual symmetrical profile bending machine. Can bend flat bar, angle, round bar, pipe (tube) and Tee profiles.