Skip to content

Blog

Pipe Bending Machine

Cold Pipe Bending Machine and Pipe Roll Machine

The BIT series profile bending machine (pipe bending machine) allow the best profile feeding and the highest driving torque of any competitive machine. A winning combination for those looking for performance of the highest level.

From the tightest bend to the broadest, BIT serise pipe bending machines’s bending processes produce little to no distortion or ovality.It work with almost all grades of carbon steel pipe and aluminum pipe. We can bend full and half pipe with equal quality and precision.

Flange Bending Machine

Flange Roll Forming Machine

In the past 30 years, due to the rapid development of China’s economy, about 20% of the machines we produce are used for flange forming, especially large flange forming that is difficult to mass produce.

For example, W24S-400, the factory manager once released a video to promote its large flange, the excitement can be felt across the screen.

Tube roller bender

Tube roller bender

BIT serise tube rolling machine (also called a “profile bending machine,”“Tube roller bender,” or an “tube bending machine.”) capabilities and equipment to provide square tube bending services on a complete range of materials, including aluminum, carbon steel, carbon stainless duplex steel, copper, titanium and exotic metals. No section is too small or too large for us to handle; we can manipulate square tubes of any size into custom-specified, flawless finished products with extremely tight tolerances.

Solid Rod Bending Machine

Round bar bending machine

BIT series profile bending machine can be used as round bar bending machine and solid bar bending machine.

High-strength tempered steel mold, high sensitivity and tolerance, without the notch effect caused by bending work.

C steel channel bending machine

Channel Bending Machine

BIT series profile bending machines can be used as C steel channel bending machines. It should be pointed out that PBH-120, PBH-140 do not support the horizontal section bending of channel steel profiles (Hard-way bending).

I beam bending machine

Beam bending machine

The section bending machine specially customized by BIT needs the ninth group of hydraulic drive components for beam bending machine. Due to the rapid development of China’s basic engineering, BIT series profile bending machines are more widely used in steel beam bending, such as the application of Chongqing Metro, a key project in China.

WQJ-400 Profile Bending Machine

MSM-50 SECTION BENDER

WQJ-400 is a small manual symmetrical profile bending machine. Can bend flat bar, angle, round bar, pipe (tube) and Tee profiles.

Hydraulic tube bending machine

Tube bending machine

BIT series profile bending machine is widely used, steel tube bending machine is one of them.
Use BIT serise section bending machine to bending tube, it is the most cost effective method of tube and pipe bending and it has the capacity to cold bend from 65mm (thick 6mm ) width to 660 mm (thick 15mm ) width square tube, and for all universal sizes in between.

Half hydraulic profile bending machine

Semi-hydraulic profile bending machine

Semi-hydraulic profile bending machine is not a BIT W24S series product,it is half hydraulic type section bending machine. It is not a product of BIT, but a product of a BIT-friendly company. We can sell this small section bending machine on your behalf.