Skip to content

Section Benders

Section Bending Machine


Section Bending Machine(Also called Profile Bending Machine, Section Benders, Angle roller, Angle Roll) includes manual and hydraulic. Guide rolls install on the two sides of the machine to ensure the bending quality.

About MS series Angle Roller

MS series profile bending machine (Angle Iron Roller)is a small manual or hydraulic profile bending machine.
Its volume and weight are very small, and of course its bending ability is also very small. Can not allowed to bend channel and H&I beam profiles.

Section Bender

MSM-50 SEcTION BENDER

The movable upper roller can move up and down by adjusting the height of the screw manually;

PROFILEMax.Section (mm)Min.Section(mm)
bar profiles bent hard way80×1530×6
bar profiles bent easy way50×1020×6
bent square bar profiles30×3010×10
bent pipe profilesØ60×1.5Ø25×1.5
bent square tube profile40×3
50x30x3
30×2
40x20x2
angle profile bending toes-in 35x35x530x30x4
angle profile bending toes-out40x40x5Φ2500
bent tee profile50×620×3
angle roll machine
Section Rollers

MSH-50 Semi-hydraulic Angle Roller

The movable upper roller can move up and down by adjusting the height of the hydraulic cylinder;

PROFILEMax.Section (mm)Min.Section(mm)
bar profiles bent hard way80×1530×6
bar profiles bent easy way50×1020×6
bent square bar profiles30×3010×10
bent pipe profilesØ60×1.5Ø25×1.5
bent square tube profile40×3
50x30x3
30×2
40x20x2
angle profile bending toes-in 35x35x530x30x4
angle profile bending toes-out40x40x5Φ2500
bent tee profile50×620×3
angle roller
Section Bender

MSH-200 hydraulic section bender

PROFILEMax.Section (mm)Min.bending DIA(mm)
bar profiles bent hard way50×12Φ500
bar profiles bent easy way100×18Φ600
bent square bar profiles50×50Φ500
bent pipe profilesΦ42×4Φ500
bent square tube profile45x45x3Φ750
angle profile bending toes-in 40x40x5Φ800
angle profile bending toes-out50x50x5Φ800
channel profiles bending toes-in80Φ600
bent tee profile50x50x4Φ500
angle roll
Section Rollers

MSH-260 Semi-hydraulic section bender

PROFILEMax.Section (mm)Min. bending DIA(mm)
bar profiles bent hard way75×16Φ800
bar profiles bent easy way150×25Φ1500
bent square bar profiles50×50Φ500
bent pipe profilesΦ76×4.5Φ700
bent square tube profile60x60x4Φ1000
angle profile bending toes-in 70x70x8Φ1000
angle profile bending toes-out80x80x8Φ2500
channel profiles bending toes-in120Φ600
angle roll machine manufacturer
section bending machine

MSH-300 Semi-hydraulic Angle Roller

PROFILEMax.Section (mm)Min.bending DIA(mm)
bar profiles bent hard way80×20Φ850
bar profiles bent easy way180×25Φ1650
bent square bar profiles55×55Φ550
bent pipe profilesΦ80×5Φ750
bent square tube profile70x70x4Φ1000
angle profile bending toes-in 90x90x10Φ1000
angle profile bending toes-out90x90x10Φ2500
channel profiles bending toes-in160Φ800