– MS SERIES –
Profile Bending Machine
MS series Profile Bending Machine (Also called Section Bending Machine, Angle roller, Angle Roll, Section Bender) includes manual and hydraulic. Guide rolls install on the two sides of the machine to ensure the bending quality.
About MS series Angle Roller
MS series profile bending machine (Angle Iron Roller)is a small manual or hydraulic profile bending machine.
Its volume and weight are very small, and of course its bending ability is also very small. Can not allowed to bend channel and H&I beam profiles.
MSM-50 SEcTION BENDER
Movable upper roller can move up and down by adjusting the height of the screw manually;
PROFILE | Max.Section (mm) | Min.Section(mm) |
80×15 | 30×6 | |
50×10 | 20×6 | |
30×30 | 10×10 | |
Ø60×1.5 | Ø25×1.5 | |
40×3 50x30x3 | 30×2 40x20x2 | |
35x35x5 | 30x30x4 | |
40x40x5 | Φ2500 | |
50×6 | 20×3 |
MSH-50 Semi-hydraulic Angle Roller
The movable upper roller can move up and down by adjusting the height of the hydraulic cylinder;
PROFILE | Max.Section (mm) | Min.Section(mm) |
80×15 | 30×6 | |
50×10 | 20×6 | |
30×30 | 10×10 | |
Ø60×1.5 | Ø25×1.5 | |
40×3 50x30x3 | 30×2 40x20x2 | |
35x35x5 | 30x30x4 | |
40x40x5 | Φ2500 | |
50×6 | 20×3 |
MSH-200 hydraulic section bender
PROFILE | Max.Section (mm) | Min.bending DIA(mm) |
50×12 | Φ500 | |
100×18 | Φ600 | |
50×50 | Φ500 | |
Φ42×4 | Φ500 | |
45x45x3 | Φ750 | |
40x40x5 | Φ800 | |
50x50x5 | Φ800 | |
80 | Φ600 | |
50x50x4 | Φ500 |
MSH-260 Semi-hydraulic section bender
PROFILE | Max.Section (mm) | Min.bending DIA(mm) |
75×16 | Φ800 | |
150×25 | Φ1500 | |
50×50 | Φ500 | |
Φ76×4.5 | Φ700 | |
60x60x4 | Φ1000 | |
70x70x8 | Φ1000 | |
80x80x8 | Φ2500 | |
120 | Φ600 |