W24S-75 Profile Bending Machine


BIT starts with the W24S-75 profile bending machine and can be equipped with a ninth group of hydraulic drive components for the most difficult to bend H-beam (Here you can also call it beam bending machine);It have two models to choose from, four-roller and three-roller. It can complete the pre-bending, bending circle and correcting arc processes of the profile at one time; the structure is advanced, the function is complete, and it can be placed vertically or horizontally according to the user’s use.

H-beam bending machine
W24S-75 Profile bending machine bending H-beam profiles


bar profiles bent hard way Max.Section(mm): 120×25 bar profiles bent easy way Max.Section(mm): 250×30
Min.bending DIA(mm): Φ1000 Min.bending DIA(mm): Φ800
bent square bar profiles Max.Section(mm): 70×70 bent pipe profiles Max.Section(mm): Φ140×4
Min.bending DIA(mm): Φ800 Min.bending DIA(mm): Φ1800
bent square tube profile Max.Section(mm): 100x100x6 angle profile bending toes-in Max.Section(mm): 120x120x12
Min.bending DIA(mm): Φ2000 Min.bending DIA(mm): Φ1500
angle profile bending toes-out Max.Section(mm): 120x120x12 channel profiles bending toes-in Max.Section(mm): 200
Min.bending DIA(mm): Φ2000 Min.bending DIA(mm): Φ1000
channel profiles bending toes-out Max.Section(mm): 200 bent tee profile Max.Section(mm): 120x120x12
Min.bending DIA(mm): Φ1000 Min.bending DIA(mm): Φ1500
bent I-beam profiles Max.Section(mm): 200 bent H-beam profiles Max.Section(mm): 120
Min.bending DIA(mm): Φ1000 Min.bending DIA(mm) Φ4000
Sectional modulus cm3: 45-75 Bending speed: 6 Meters/Minute
Material yield limit(Mpa): 250 Motor power (KW): 11


W24S-75 profile bending machine is an arc-down-adjustable section bending machine. The two side rollers of the machine are the main driving rollers, or three or four work rollers are the main driving rollers. The upper rollers are in a fixed position, and the two side rollers arc around the center of rotation. The linear lifting motion, hydraulic control, and displacement liquid crystal display are conducive to controlling the profile forming process. There are roller devices on both sides to ensure the rolling quality of asymmetric cross-section profiles.

W24S-75 Profile Bending Machine Application

W24S-75 profile bending machine is a machine for bending bar, square bar , round bar, angle, I-beam, H-beam, square tube, rectangular tube, pipe and other profiles. Fast rolling speed and high efficiency.

Video of W24S-75

W24S-75 Profile Bending Machine Photos

Important link

List of our products:profile bending machine
Must know section bending information:practical guide to the section bending of various metal profiles