Angle Roller
Angle & Section & Profile Bending Machine
Manufacturer

Home >> Angle Roller >> W24-100 Section Bending Machine

W24-100 Section Bending Machine

Angle Roller, Profile Bending Machine Specifications

W24-100 Section Bending Machine
W24-100 Section Bending Machine
 

                   Device model

Technical parameters

Unit

W24S-100

 

The Max bending section modulus of profile

Cm3

100

 

Material yield limit

Mpa

250

 

Profile Bending speed

m/min

~5

Angle bar bending (inner bending)

Max section(mm)

120*12

 

Angle bar bending (outer bending)

Max section(mm)

140*16

 

U-steel(inner/ outer)

Max section(mm)

28

 

Flat steel plane-bending

Max section(mm)

250x40

 

Flat steel vertical-bending

Max section(mm)

120x40

 

Circular pipe

Max section(mm)

Φ159x5

 

Round Steel

Max section(mm)

Φ90

 

Square tube bending

Max section(mm)

100x100x10

 

Detail

Feature:

1. Perfectly complete pre-bending, rolled-up, roll calibrate.

2. Working principle: two down rollers as main driving roller, or all three rollers as main driving roller; with upper roller fixed and two down rollers do up-and-down movement around one fixed center.

3. Well hydraulic control, displacement liquid-crystal display with accuracy ±0.1mm.

4. The two touch steel stick can permit the good finishing quality of asymmetric plate section bending.

5. Advanced and compact structure with full function.

6. Pre-bending function.

Description:
Section Bending Machine
W24-100 Section Bending Machine

W24-100 Section Bending Machine is the head part of machine and machine body stiffener design , and be annealed to reduce internal stress, overall there is enough strength and rigidity to prevent permanent deformation

Angle roller use of advanced and reliable arc down structure, rotating around the center of the two lower rollers (upper roller) to do an arc down movement; three work rollers are active rolled by three independent hydraulic drive; a feeding finished, Various profiles (angle, channel, H section steel, round steel, etc.) end pre-bending and profile bending can be bent into a variety of profiles which needed to be round, curved, spiral, elliptical and other artifacts.

Prile bending machine (Section bending machine) is a kind of high efficiency processing equipment which is specially used to bending various kinds of profiled steel such as angle steel, channel steel, I-steel, flat steel,square steel and round steel. It can one time finish the procedure of round rolling and round correcting. It is widely used in the field of petroleum, chemical industry, hyropower, ship building and machine manufacturing.

The two lower rollers are main transmission rollers and the three working rollers can aslo be main transmission roller. Two side rollers revolve the fixed centre of rotation to make the vibratory movement. There is support roller device at the two sides to ensure the rolling quality of the non symmetrical cross section profiles. The machine is with advanced construction, reliable works, small volume, complete function. It is advanced section bending equipment both home and abroad.

Section Bending Machine
W24-100 Section Bending Machine

W24-100 Section Bending Machine have hydraulic supporting roller on both sides of machine can provent non-symmetrical profiles distorted in the process of profile bending, enabling non-symmetrical cross-section profiles to ensure the quality of volume curve .

Angle roller
W24-100 Section Bending Machine

Features:
Fully hydraulic drive: right lower pre-bending roller, three-roller (both active roller) motor rotation bending, left pre-roll bending, back bending check round, discharge.

Profile Bending Machine
W24-100 Section Bending Machine

Microcomputer controller dynamic intuitive color touch screen and generous, you can set the movement of two lower rollers displacement vector and can store 10 kinds of data.

Quick switch on the CNC operation controller can be used to complete pre-bending, bending, thick part of the material pre-bending, back bending, discharge, reset, the whole process.

Angle roller
W24-100 Section Bending Machine

About Us

Nantong Borisbang Industrial Technology (NBIT) rooted in Haian County of Jiangsu Province,China. The main production angle roller. NBIT was founded in 2001 and has more than 17 years experience in this field.

Nantong Borisbang Industrial Technology (NBIT) is your specialist and technology partner for powerful and future-proof bending machines and bending solutions.Having a solid trained technical team with a wide range of quality Section Bending Machines, and On-Time Deliveries, we have been accumulating happy customers worldwide.

Our core focus and specialisation is in the Section Bending Machines.

Over the years, the Company has grown multifold and currently exports to several countries in Sweden, Germany, England, Thailand, Iran, Korea, Vietnam, Russia, Malaysia, Dubai, Saudi, Arabia, India, South Africa, United Arab Emirates, Singapore, Uzbekistan.