W24S-45 PROFILE BENDING MACHINE

W24S-45 profile bending machine is the second smallest machine in the W24S series of our company’s products. It also does not have the function of bending H-beam; of course, other profiles such as: angle, pipe,square tube, channel, I-beam, flat & square bar and tees It can be easily bent. They are more used to bend flanges (Here you can also call it a flange bending machine) in some factories in China.

Description

W24S-45 profile bending machine is the second smallest machine in the W24S series of our company’s products. It also does not have the function of bending H-beam; of course, other profiles such as: angle, pipe,square tube, channel, I-beam, flat & square bar and tees It can be easily bent. They are more used to bend flanges (Here you can also call it a flange bending machine) in some factories in China.

The standard configuration is equipped with 8 sets of hydraulic components to ensure accurate bending of profiles.

Like other BIT series section bending machines, the W24S-45 profile bending machine can provide the best results for the bending of special and standard profiles as well as low carbon steel, stainless steel, aluminum, bronze, copper and other steel alloys.


In the introduction of the W24S-250 machine, we showed a picture of the W24S-45 bending stainless steel channel.


Reinforced support plates are also hidden inside the fuselage to ensure the stability of the fuselage during bending.


Some small details can better understand our craftsmanship.

Specifications

Max.Section(mm): 100×25 Max.Section(mm): 200×35
Min.bending DIA(mm): Φ700 Min.bending DIA(mm): Φ600
Max.Section(mm): 60×60 Max.Section(mm): Φ102×4
Min.bending DIA(mm): Φ600 Min.bending DIA(mm): Φ1000
Max.Section(mm): 90x90x5 Max.Section(mm): 100x100x12
Min.bending DIA(mm): Φ1500 Min.bending DIA(mm): Φ1200
Max.Section(mm): 100x100x12 Max.Section(mm): 140
Min.bending DIA(mm): Φ2000 Min.bending DIA(mm): Φ600
Max.Section(mm): 140 Max.Section(mm): 80x80x10
Min.bending DIA(mm): Φ600 Min.bending DIA(mm): Φ800
Max.Section(mm): 140 Max.Section(mm):  
Min.bending DIA(mm): Φ600 Min.bending DIA(mm)  
Sectional modulus cm3: 16-45 Bending speed: 6 Meters/Minute
Material yield limit(Mpa): 250 Motor power (KW): 11

W24S-45 Profile Bending Machine Photo

W24S-45 Profile Bending Machine Feature

W24S-45 Section Bending Machine ( Profile bending machine ) bed as a steel plate welding structure, and annealing treatment to eliminate internal stress.

The machine has sufficient strength and stiffness to satisfy the bending of the profile in the range of the machine.

W24S-45 Section Bending Machine is mainly composed of fuselage part, side roll part, idler part, transmission part, electrical part and hydraulic system, mould and so on.

Profile bending machine has the bending function of the profile, three working rollers are mainly drive rollers, through the hydraulic motor, gear to achieve, the two lower roll for hydraulic transmission.

The two rollers can be around the fixed rotary center to do arc movements, work rolls on both sides of the roll and Correction Guide roll device, to ensure that asymmetrical section (such as angle steel) profile roll quality.

Install the bending angle iron mold of W24S-45 PROFILE BENDING MACHINE

Under the link, we provide detailed information on three series of profile bending machines. You can click on the specific model to read more detailed machine information and some related stories about the machine.

W24S SERIES

All W24 series section bending machine are driven by hydraulic motor (up to 9), powerful bending ability.
Standard machine section modulus: 16CM3-600CM3. It can bend copper, carbon steel, stainless steel and aluminum profiles.
Angle, channel, beam, flat bar, round & square bar,pipe,square tube.

CNC Aluminum Profile Bending Machine

Servo motor drive. Photoelectric positioning, CNC control. Accuracy is as high as ≤0.01mm.
Suitable for difficult variable-curvature arc aluminum bending processing.Suitable for bending of aluminum profiles for automobiles, doors and windowsSuitable for bending of aluminum profiles for automobiles, doors and windows

MS SERIES

Small section bender (section bending machine), with manual and semi-hydraulic drives, can bend profiles other than beam.
Cheap price, first choice for small factories

SECTION AND PROFILE BENDING

Section bending methods of metal profiles.

Select the items you want to follow based on the subtitles below.
Next, you will find relevant information, including the processing capabilities of different profile bending machines manufactured by BIT related to the project you care about.