PBH-140 PROFILE BENDING MACHINE
PBH-140 profile bending machine is the second smallest machine in the PBH series of our company’s products. It also does not have the function of bending H-beam; of course, other profiles such as: angle, pipe,square tube, channel, I-beam, flat & square bar and tees It can be easily bent. They are more used to bend flanges (Here you can also call it a flange bending machine) in some factories in China.
Description
PBH-140 profile bending machine is the second smallest machine in the PBH-140 series of our company’s products. It also does not have the function of bending H-beam; of course, other profiles such as: angle, pipe,square tube, channel, I-beam, flat & square bar and tees It can be easily bent. They are more used to bend flanges (Here you can also call it a flange bending machine) in some factories in China.
The standard configuration is equipped with 8 sets of hydraulic components to ensure accurate bending of profiles.
Like other BIT series section bending machines, the PBH-140 profile bending machine can provide the best results for the bending of special and standard profiles as well as low carbon steel, stainless steel, aluminum, bronze, copper and other steel alloys.
In the introduction of the PBH-450 machine, we showed a picture of the PBH-140 bending stainless steel channel.
Reinforced support plates are also hidden inside the fuselage to ensure the stability of the fuselage during bending.
Some small details can better understand our craftsmanship.
Specifications
 |
Max.Section(mm): | 100×25 |
 |
Max.Section(mm): | 200×35 |
| Min.bending DIA(mm): | Φ700 | Min.bending DIA(mm): | Φ600 | ||
 |
Max.Section(mm): | 60×60 |
 |
Max.Section(mm): | Φ102×4 |
| Min.bending DIA(mm): | Φ600 | Min.bending DIA(mm): | Φ1000 | ||
 |
Max.Section(mm): | 90x90x5 |
 |
Max.Section(mm): | 100x100x12 |
| Min.bending DIA(mm): | Φ1500 | Min.bending DIA(mm): | Φ1200 | ||
 |
Max.Section(mm): | 100x100x12 |
 |
Max.Section(mm): | 140 |
| Min.bending DIA(mm): | Φ2000 | Min.bending DIA(mm): | Φ600 | ||
 |
Max.Section(mm): | 140 |
 |
Max.Section(mm): | 80x80x10 |
| Min.bending DIA(mm): | Φ600 | Min.bending DIA(mm): | Φ800 | ||
 |
Max.Section(mm): | 140 |  |
Max.Section(mm): | |
| Min.bending DIA(mm): | Φ600 | Min.bending DIA(mm) | |||
| Sectional modulus cm3: | 16-45 | Bending speed: | 6 Meters/Minute | ||
| Material yield limit(Mpa): | 250 | Motor power (KW): | 11 | ||
PBH-140 Profile Bending Machine Photo
PBH-140 Profile Bending Machine Feature
PBH-140 Section Bending Machine ( Profile bending machine ) bed as a steel plate welding structure, and annealing treatment to eliminate internal stress.
The machine has sufficient strength and stiffness to satisfy the bending of the profile in the range of the machine.
PBH-140 Section Bending Machine is mainly composed of fuselage part, side roll part, idler part, transmission part, electrical part and hydraulic system, mould and so on.
Profile bending machine has the bending function of the profile, three working rollers are mainly drive rollers, through the hydraulic motor, gear to achieve, the two lower roll for hydraulic transmission.
The two rollers can be around the fixed rotary center to do arc movements, work rolls on both sides of the roll and Correction Guide roll device, to ensure that asymmetrical section (such as angle steel) profile roll quality.
Install the bending angle iron mold of PBH-140 PROFILE BENDING MACHINE
TYPES OF
PROFILE BENDING MACHINE
Under the link, we provide detailed information on three series of profile bending machines. You can click on the specific model to read more detailed machine information and some related stories about the machine.
PBH SERIES
All PBH series section bending machines are driven by a hydraulic motor (up to 9), with powerful bending ability.
Standard machine section modulus: 16CM3-600CM3. It can bend copper, carbon steel, stainless steel, and aluminum profiles.
Angle, channel, beam, flat bar, round & square bar, pipe, square tube.
CNC Aluminum Profile Bending Machine
Servo motor drive. Photoelectric positioning, CNC control. Accuracy is as high as ≤0.01mm.
Suitable for difficult variable-curvature arc aluminum bending processing.Suitable for bending aluminum profiles for automobiles, doors, and windows suitable for bending aluminum profiles for automobiles, doors, and windows
PBT SERIES
High-performance cold pipe bending machine, CNC control, multiple programs, multiple angle settings, simpler operation, and program settings.
It is widely used and can be used in mass-produced or standardized products, such as exhaust pipes, seats, bumpers, and all steel furniture.
BENDING PROCESS
Section bending methods of metal profiles.
Recommendations for bending processes and bending machines for metal profile sections.