Skip to content

Flange Bending Machine

Section Bending Machine

PBH 500 Profile Bending Machine

PBH 500 profile bending machine is a large section bending machine with a volume of 3000×3000×2800mm and a weight of 30T.
The profile bending machine in the picture is ordered by a factory to bend I-Beame and rectangular tubes.

W24S-250 Profile Bending Machine

PBH-450 Profile Bending Machine

PBH 450 profile bending machine is also one of our most popular section bending machines. At the same time, for the convenience of transportation, we have reduced the size of the machine while ensuring the bending performance, so that it can be accommodated in a 20-foot container. The small volume has a huge profile bending ability.

W24S-140 Profile Bending Machine

PBH-300 Profile Bending Machine

PBH-300 profile bending machine is used as a section bending machine for bending flat steel in Jiangsu, China. In fact, it is omnipotent like 007. From the most difficult to bend H-beam to some weird profile bending, such as the curved profile bending in the picture below, we even designed a machine to produce flat steel into semi-circular profiles.

W24S-75 Section Bending Machine

PBH-200 Profile Bending Machine

BIT starts with the PBH 200 profile bending machine and can be equipped with a ninth group of hydraulic drive components for the most difficult to bend H-beam (Here you can also call it beam bending machine);

PBH-120 Profile Bending Machine

Home > Section Bending Machines > PBH-120 Profile Bending Machine SPECIFICATION Sectional bending capacity of profile Max.Section(mm): 80×10 Max.Section(mm): 180×20 Min.bending DIA(mm): Φ800 Min.bending DIA(mm): Φ1500 Max.Section(mm): 50×50 Max.Section(mm): Φ76×4 Min.bending DIA(mm): Φ500 Min.bending DIA(mm): Φ700 Max.Section(mm): 65x65x6 Max.Section(mm): 80x80x10… Read More »PBH-120 Profile Bending Machine

section bender

PBH-50 SECTION BENDER

WQJY-50 profile bending machine is a small manual profile bending machine, which can be used for bending angle (angle bending machine).
Its volume and weight are very small, and of course its bending ability is also very small. Can not allowed to bend channel and H&I beam profiles.

Angle bending machine

Unequal angle bending machine

Unequal angle bending machine ( angle flange bending machine) and angle rolling machine are two names of the same machine Unequal angles are often used in tank stiffeners, matching flanges, curved lintels, hand rails, lagging rings, form work and fabricated roof trusses.