section bender

W24-75 4-ROLL HYDRAULIC PROFILE BENDING MACHINE

The section bending capacity of W24S-75 4-roll profile bending machine is the same as that of W24S-75 three-roll section bending machine; the difference is that it has four rolls,has the function of pre-bending the end of the profile, which can complete the pre-bending of the end of the profile and the roll forming of the workpiece without turning.Here, every secondary element is eliminated and results in higher torque transmission. Reduce the flat end of the profile, thereby saving a lot of cost.

Hydraulic Profile Bending Machine

Description

The section bending capacity of W24S-75 4-roll profile bending machine is the same as that of W24S-75 three-roll section bending machine; the difference is that it has four rolls,has the function of pre-bending the end of the profile, which can complete the pre-bending of the end of the profile and the roll forming of the workpiece without turning.Here, every secondary element is eliminated and results in higher torque transmission. Reduce the flat end of the profile, thereby saving a lot of cost.

W24-75 4-Roll Hydraulic Profile Bending Machine

Small size, compact and reasonable structure, reliable performance, convenient operation and maintenance, and bending accuracy meets industry standards;

W24-75 4-Roll Profile Bending Machine Specifications

Max.Section(mm): 120×25 Max.Section(mm): 250×30
Min.bending DIA(mm): Φ1000 Min.bending DIA(mm): Φ800
Max.Section(mm): 70×70 Max.Section(mm): Φ140×4
Min.bending DIA(mm): Φ800 Min.bending DIA(mm): Φ1800
Max.Section(mm): 100x100x6 Max.Section(mm): 120x120x12
Min.bending DIA(mm): Φ2000 Min.bending DIA(mm): Φ1500
Max.Section(mm): 120x120x12 Max.Section(mm): 200
Min.bending DIA(mm): Φ2000 Min.bending DIA(mm): Φ1000
Max.Section(mm): 200 Max.Section(mm): 120x120x12
Min.bending DIA(mm): Φ1000 Min.bending DIA(mm): Φ1500
Max.Section(mm): 200 Max.Section(mm): 120
Min.bending DIA(mm): Φ1000 Min.bending DIA(mm) Φ4000
Sectional modulus cm3: 45-75 Bending speed: 6 Meters/Minute
Material yield limit(Mpa): 250 Motor power (KW): 11

W24S-75 four-roll section bending machine features

W24S-75 4-roll section bending machine main drive type: All four work rolls are main drive rollers, which are realized by hydraulic motor and gears.

The position of the upper roller is fixed.

The three lower rollers move up and down as hydraulic drive.

Can be adjusted independently in six directions to ensure the best control of the flatness of the rolling, and to correct the distortion generated during the profile rolling process.

BIT four-roll profile bending machine has up to 6 sets of hydraulic components, which can accurately drive the 3D guide rollers of the profile bending machine

W24-75 4-Roll Hydraulic Section Bending Machine

By adjusting two more powerful horizontal hydraulic 3D guide rollers, they can be adjusted in the six directions of up and down, left and right movement and push/pull, respectively, and can support and accompany curved profiles to ensure optimal control of the rolling level Straightness, and correct the deformation of the profile rolling process.

W24S SERIES

All W24 series section bending machine can bend copper, carbon steel, stainless steel and aluminum profiles.
Angle, channel, beam, flat bar, round & square bar,pipe,square tube.

CNC SERIES

CNC aluminum profile bending machine.

Suitable for bending of aluminum profiles for automobiles, doors and windows

MS SERIES

Small section bender, with manual and semi-hydraulic drives, can bend profiles other than beam.

Section bending methods of metal profiles and the corresponding bending capabilities of various BIT models.

Select the items you want to follow based on the links below.

CLICK HERE