Skip to content

W24S-100 4-roll Hydraulic Profile Bending Machine

Profile Bending Machine


This model W24S-100 belongs to the old model of BIT, which has now been replaced by W24S-140. This is because the processing capacity of the 140 profile bending machine covers the processing range of the 100 model.

Due to the design of BIT and the materials used, some of our customers even use our W24S-75 to bend the work within the processing capacity of the 100-type machine. This is also a thing that surprised us; of course we do not advocate this. Work, after all, will have a bad influence on the machine in the long term.

4-Roll Profile Bending Machine Specifications

bar profiles bent hard way Max.Section(mm): 250×40 bar profiles bent easy way Max.Section(mm): 250×40
Min.bending DIA(mm): Φ1200 Min.bending DIA(mm): Φ1300
bent square bar profiles Max.Section(mm): 90×90 bent pipe profiles Max.Section(mm): Φ159×5
Min.bending DIA(mm): Φ1500 Min.bending DIA(mm): Φ2000
bent square tube profile Max.Section(mm): 100x100x10 angle profile bending toes-in Max.Section(mm): 120x120x12
Min.bending DIA(mm): Φ2000 Min.bending DIA(mm): Φ2000
angle profile bending toes-out Max.Section(mm): 140x140x16 channel profiles bending toes-in Max.Section(mm): 270
Min.bending DIA(mm): Φ1400 Min.bending DIA(mm): Φ1700
channel profiles bending toes-out Max.Section(mm): 270 bent tee profile Max.Section(mm): 130x130x15
Min.bending DIA(mm): Φ1700 Min.bending DIA(mm): Φ1500
bent I-beam profiles Max.Section(mm): 240 bent H-beam profiles Max.Section(mm): 200
Min.bending DIA(mm): Φ2000 Min.bending DIA(mm) Φ4000
Sectional modulus cm 3: 75-100 Bending speed: 6 Meters/Minute
Material yield limit(Mpa): 250 Motor power (KW): 15

W24S-100 Profile Bending Machine Photos

These pictures are our first-generation products. From the pictures, you can find that the section bending machine does not have the 3D guide rollers that are currently equipped with all BIT series.