The machine belongs to the hydraulic type three-roll cone rolling machine, used for rolling steel plates into conical shapes. The upper roll is pressed down by the motor through the power transmission of the oil pump
3-Roll Bending Machine
The upper roller can move up and down as well as horizontally. The vertical movement of the upper roller is used to change the curvature of the bent sheet, while the forward and backward movement of the upper roller is employed to alter its symmetrical position with respect to the central axis of the two lower rollers. This achieves the bending of the sheet at the end and meets the process requirements for various bending needs. In the production process, there is no need for additional equipment such as a press. After one feeding, the machine can complete the pre-bending and forming of both ends of the sheet without the need to turn around. This includes the pre-bending and forming functions, as well as the correction of formed workpieces.
The PRV 2035 3-Roll Bending Machine designed for heavy-duty metal fabrication tasks.
Its remarkable capabilities allow for rolling materials up to 200mm thick and handling plates as wide as 3500mm, while achieving a minimum rolling plate diameter of 4500mm.