Angle Bending Machine, Angle Roller
Section Bending Machine
Manufacturer

Angle Bending Machine >> Section Bending Machine >> BR140 4-roll Section Bending Machine

BR140 4-roll Section Bending Machine

Technical Parameters

BR140 4-roll Section Bending Machine

Specifications

Overview

BR140 4-roll Section Bending Machine is a hydraulic four-section Section Bending Machine. It is used to roll steel sections into circular, circular and spiral shapes. It can be used to complete pre-bending, rolling, and rounding operations at a time.

BR140 4-roll Section Bending Machine The upper roller is a fixed roller, the lower roller can be moved laterally, and the profile can be clamped by applying pressure through the cylinder. Left and right sides of the roller can be moved laterally, and pressure can be applied through the cylinder to achieve profile pressing.

The winding circle is driven by the motor driving the four drive shafts through the reduction gear box. BR140 4-roll Section Bending Machine The upper and lower left and right four work rolls are the main drive rolls. Through the cylinder pressure, the tie roller clamps the steel to effectively overcome the slippage phenomenon when the profile is rolled.

The digital display device can display the real-time rolling state of the material, and is particularly suitable for large-volume rolling of the same size steel. Easy to display, data at a glance. High processing efficiency, convenient and quick operation.

The BR140 4-roll Section Bending Machine is equipped with a roller device that is mechanically driven. The rollers can be lifted and rotated to facilitate the correcting of various asymmetric section profiles.

 

Features

4-roll Section Bending Machine

Features

The two upper and lower work rolls are clamped to each other and are the main drive roller, completely overcoming the slippage phenomenon when the profile is rolled.

Radial bearings are roller bearings with high bearing capacity.

The lift and rotation of the guide roller are mechanically driven, which is convenient and reliable.

The two bending rollers are hydraulically driven and the digital display shows high processing efficiency and convenient operation.

The BR140 4-roll Section Bending Machine adopts a vertical (vertical upright) arrangement. The up and down of the profile and the rolling system are convenient and safe.

The unique combined dust cover prevents iron filings, scales, etc. from entering the case during the profile rolling process, protecting the bearings and gears.

angle bending machine for flat steel cul-turn
Max.Section(mm):150x30
Min.bending DIA(mm):Φ1500
angle bending machine for flat steel out-turn
Max.Section(mm):250x40
Min.bending DIA(mm):Φ1000
angle bending machine for square steel
Max.Section(mm):80x80
Min.bending DIA(mm):Φ1500
angle bending machine for steel round tube
Max.Section(mm):Φ170x6
Min.bending DIA(mm):Φ2000
angle bending machine for steel square tube
Max.Section(mm):120x120x8
Min.bending DIA(mm):Φ3000
angle bending machine for L steel&angle steel cul turn
Max.Section(mm):140x140x14
Min.bending DIA(mm):Φ1500
angle bending machine for L steel&angle steel out turn
Max.Section(mm):140x140x14
Min.bending DIA(mm):Φ2500
angle bending machine for channel steel&U steel cul turn
Max.Section(mm):300
Min.bending DIA(mm):Φ1200
angle bending machine for channel steel&U steel out turn
Max.Section(mm):300
Min.bending DIA(mm):Φ1200
angle bending machine for I steel cul turn
Max.Section(mm):300
Min.bending DIA(mm):Φ1200
angle bending machine for I steel out turn
Max.Section(mm):160
Min.bending DIA(mm):Φ6000
 
Sectional modulus cm3:75-140
Bending speed:6 Meters/Minute
Material yield limit(Mpa):250
Motor power (KW):15

About Us

Nantong Borisbang Industrial Technology (NBIT) rooted in Haian County of Jiangsu Province,China. The main production angle bending machine. NBIT was founded in 2001 and has more than 17 years experience in this field.

Nantong Borisbang Industrial Technology (NBIT) is your specialist and technology partner for powerful and future-proof bending machines and bending solutions.Having a solid trained technical team with a wide range of quality Section Bending Machines, and On-Time Deliveries, we have been accumulating happy customers worldwide.

Our core focus and specialisation is in the Section Bending Machines.

Over the years, the Company has grown multifold and currently exports to several countries in Sweden, Germany, England, Thailand, Iran, Korea, Vietnam, Russia, Malaysia, Dubai, Saudi, Arabia, India, South Africa, United Arab Emirates, Singapore, Uzbekistan.